3D printing platforms

Send a model from the Meshy web app straight into your slicer or printer software, such as Bambu Studio or Ultimaker Cura, without downloading and importing the file by hand.

Before you begin

  • You need a Pro plan or higher. On the Free and Starter plans, clicking an app opens the upgrade options.

  • Install the app on the computer where you use the Meshy web app. The web app opens the app through your browser, so you don't need a plugin.

Send a model to your app

To send a model to your app, follow these steps:

  1. In the left sidebar of the Meshy web app, click Print. If the panel asks you to select a model, select it in the list of your generations.

  2. In the Print panel, under Send to Printer, click your app.

  3. In the browser prompt, click the button that opens the app.

Meshy exports the model, and the app opens it. Some apps ask you to confirm the import first. For the steps in your app, see its page in the following table.

You can also send from the viewer toolbar. With the Print panel open, click Send to Printer (the paper plane icon), and then click your app in the menu.

Supported platforms

The following table lists the apps you can send models to, and the file format Meshy sends to each.

AppDescriptionFormat
Flash StudioOfficial slicer for Flashforge 3D printers3MF
Snapmaker OrcaOfficial slicer for Snapmaker 3D printers3MF
xTool StudioOfficial software for xTool laser engravers and UV printersOBJ
Bambu StudioOfficial slicer for Bambu Lab 3D printers3MF
OrcaSlicerOpen-source slicer based on Bambu Studio3MF
Creality PrintOfficial slicer for Creality 3D printers3MF
Elegoo SlicerOfficial slicer for Elegoo 3D printers3MF
Ultimaker CuraOfficial slicer for Ultimaker 3D printersSTL
Lychee SlicerSlicer by Mango3D for resin and filament 3D printersSTL

To print a textured model in several colors, click Multi-Color Print in the Print panel. It can send the multi-color model to every app in the table that gets a 3MF file.

Next steps